Rustoleum 400ml Areosol Appliance Enamel White Gloss

APPLIANCE ENAMEL - USE ONLY AS DIRECTED. An ultra-tough, moisture resistant enamel t hat is specifically formulated for indoor metal surfaces. Provides a smooth, washable surface for refinishing the exterior of appliances such as washing machines, tumb le dryers, refrigerators, dishwashers and other indoor metal applications. Prevents rust. Preparation: Ensure surfaces to be painted are fr ee from any loose paint, rust, wax, oil and grease. Previously painted surf aces should be abraded to provide a key. Cover surrounding areas to protect spray mist. Application: Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Ho ld can 30cm from surface and spray in a steady back and forth motion, slightly overla pping with each stroke. For best results whilst spraying keep the can the same distanc e from the surface and keep the can in motion. Apply several light coats a few minutes apart. Cleaning: Wipe wet paint from tip before stori ng, if the valve clogs during use, remove and rinse with white spirit. Drying and recoating: Touch Dry in 2-4 hours. Hard Dry in 24 hours. Recoat within 1 hour or after 24 hours. Coverage: The can covers approximately 1. 5m² per coat dependant upon surface profile/porosity. Limitations: Do not use on galvanised steel or surfaces that regularly exceed temperatures over 90°C. Apply only when temperature is between 10-32°C and relative humidity below 85%