Stretcher Bars and Canvas
-
-
Rubber Mallet Light Duty
£13.30Out of stock
Rubber mallet for knocking together stretcher bars without damaging the wood. Weight: 300g (10oz). Size: 54mm (2 1/8 in). Learn More -
Rubber Mallet Heavy Duty
£16.70Out of stock
Rubber mallet for knocking together stretcher bars without damaging the wood. Weight: 525g (1lb 3oz) Diameter 64mm (2 1/2 in) Learn More -
Standard Stretcher Bars
Starting at: £1.45
These light duty stretcher bars are made of laminated pine and have a slight lip that keeps the canvas away from the inside edge of the bar. These bars have a maximum size of 36 inches and do not come with cross bars. Sold per single piece. Supplied with wedges. Learn More -
Branded Stretcher Bars - A sizes
Starting at: £2.15
Russell & Chapple ‘Branded’ stretchers are our quality range of canvas stretcher frames. They are made of laminated pine to minimise warping, and have a 1/4 in lip to raise the canvas away from the bars. The bars made in ‘A’ paper sizes are not mortised for cross-bars at any length. Learn More -
Branded Stretcher Bars
Starting at: £2.10
Russell & Chapple ‘Branded’ stretchers are our quality range of canvas stretcher frames. They are made of laminated pine to minimise warping, and have a 1/4 in lip to raise the canvas away from the bars. All bars are mortised to take cross-bars from 36 inches. The bars made in ‘A’ paper sizes are not mortised for cross-bars at any length. Learn More -
Branded Cross Bars
Starting at: £1.80
Branded Cross-bar are available for all sizes. These are useful for bracing a larger frame, and are necessary when one of the dimensions is 36 inches or over. Crossbars are notched to overlap from 36 inches, either at the Front or Back. To make a cross you will need one Front and one Back cross-bar. Sold per single piece. Supplied with wedges. Learn More -
Wedge Retainer 4mm High Density Polyethylene With Pin
£0.60 As low as: £0.48Wedge Retainer 4mm High Density Polyethylene With Pin Learn More -
Exhibition Stretcher Bars A Sizes
Starting at: £4.68
Top quality 36 mm deep artists’ stretcher bars made from European pine. Extra strong laminated wood construction to minimise warping. Mortised (M) for cross bars from 100 cm. Mitre cut expansion corners. Lip finished to 2 mm radius to minimise cracking. Learn More -
Exhibition Stretcher Bars
Starting at: £4.32
Top quality 36 mm deep artists’ stretcher bars made from European pine. Extra strong laminated wood construction to minimise warping. Mortised (M) for cross bars from 100 cm. Mitre cut expansion corners. Lip finished to 2 mm radius to minimise cracking. Learn More -
Exhibition Cross Bars
Starting at: £3.00
Crossbars notched (N) for overlap from 120 cm. Sold per single piece. Supplied with wedges. Learn More -
Wedge Retainer 6mm High Density Polyethylene With Pin
£0.68 As low as: £0.55Wedge Retainer 6mm High Density Polyethylene With Pin Learn More -
Aluminium 36 mm Conservation Bars
Starting at: £19.40
Aluminium Conservation Bars: 36 mm deep by 62 mm wide solid aluminium stretcher bars for professional and conservation use. The heavy gauge aluminium has a much lower deflection than wood / aluminium composite bars, so the bars do not distort under tension. The bars are fitted with a wooden strip at the back for securing the fabric and come supplied with all fittings Learn More -
Aluminium 18 mm Conservation Bars
Starting at: £17.60
Aluminium Conservation Bars:
Learn More
18 mm deep by 62 mm wide solid aluminium stretcher bars for professional and conservation use.
The heavy gauge aluminium has a much lower deflection than wood / aluminium composite bars, so the bars do not distort under tension.
The bars are fitted with a wooden strip at the back for securing the fabric and come supplied with all fittings. -
Aluminium Conservation Centre Bar
Starting at: £16.40
Aluminium Conservation Centre Bar:
Learn More
Because of the strength of aluminium stretcher bars, cross-bars are not necessary for lengths under 150 cm.
To have a cross-bar on the short dimension the frame needs a solid Centre Bar.
For the longer cross-bar dimension the frame will need a pair of Half Bars.
Centre Bars and Half Bars are secured using Cross-bar Clamps at each end.
You have no items in your shopping cart.
